Fitment Notes: 2017-2019 4WD Ford Powerstroke
Transmission contains the following:
All new Carbon Graphitic clutches
All new custom machined steels
Improved heavy duty 4-5-6 Overdrive Clutch pack
Increased overdrive clutch count
Custom machined Overdrive apply piston
New Gasket, Seal, & O'ring sealing kit
New Transmission Filter Kit
New pump bearing
New SunCoast Patented Dampener
New Factory Recalibrated valve body
New Motorcraft Pump
Billet SFI Certified Flexplate
Deep Mag-Hytec Transmission Pan
New SunCoast Patented Damper
Sure Cure Valve body calibration kit
Billet Intermediate Shaft
Billet Clutch Hub
6R140 GUARDIAN Torque Converter.
The Patent and the Damper
The 6R140 E clutch hub is designed without any damper. This makes perfect sense due to the fact that Ford designed the 6R140 Torqshift transmission with the thought process that there would be torque management. With torque management in place we are defueling during shifts essentially pulling the power between shifts. Ford has also designed this with a certain torque limit in mind that most certainly did not have deletes, larger chargers, and aftermarket tuners involved. Couple this along with the removal of torque management and you have created a situation where failure is imminent.
SunCoast has designed a completely new 4-5-6 clutch hub that incorporates a damper assembly that also uses a Sound Reduction/Absorption Technology that eliminates the dreaded squawk and restores shift quality. This new clutch hub damper allows for clean, crisp, and silent gear exchange. This allows us to use much more sophisticated friction materials with higher friction coefficients ensuring longevity and reliability. This new Patented SunCoast E Clutch Hub Damper has seen over 1,000HP reliably. It is only available at SunCoast.
SunCoast has also developed a new 4-5-6 "E" clutch power pack using nine of our custom frictions. This new proprietary SunCoast clutch pack is exclusively designed for our patented clutch hub. This custom SunCoast set-up provides a very clean and crisp shift. The extra capacity in the clutch pack along with the higher friction coefficient provides unmatched performance that cannot be matched by anything else on the planet.
The Pump Bushing
The factory pump on the 6R140 often suffers a loss of lubrication pressure at the converter hub support pump bearing due to failure of the bearing seal. When the bearing itself fails catastrophic failure can and will occur. This new bearing restores normal operation and integrity back to the pump.
The Intermediate Shaft
With vehicles with upgraded performance modifications, larger wheels and tires, or heavy towing it is not uncommon to see the intermediate shaft fail. Now that the overdrive clutches no longer slip during apply the intermediate shaft is exposed to a greater amount of torsional fatigue. This fatigue from any one of these circumstances can and will cause shaft failure. Suncoast offers a new billet shaft made from maraging steel (also known as Vascomax).
The Billet Flexplate
SunCoast custom one-piece flex plate is not only stronger but more durable than any other flex plate out there today. SunCoast proprietary manufacturing process utilizing our state-of-the-art machining and hardening techniques ensures unmatched strength and concentricity.
The Deep Pan
The Mag-Hytec 6R140 Transmission Pan for your 2011-2015 Ford Super Duty 6.7L Powerstroke provides increased fluid and cooling capacity for the automatic transmission in your truck. Built from heavy-duty cast A356-T6 aluminum and powder coated with machined cooling fins, these pans will look great and perform for the lifetime of your truck. This transmission pan is a bolt-on replacement and will hold 5.5 quarts of fluid over stock with an overall height of 4-1/4". Filter not included.
SunCoast custom one-piece flex plate is not only stronger but more durable than any other flex plate out there today. SunCoast proprietary manufacturing process utilizing our state-of-the-art machining and hardening techniques ensures unmatched strength and concentricity.
The Quadralock Captured Clutch Converter
Ford, when designing the 6R140, also added Sinter-brazed gear carriers and a dual media filter that can extend service intervals up to 150,000 miles.
The 6R140 Transmission also has an integrated live PTO with a higher torque capacity than its Allison counterpart, while coming in at a stealthy 25lbs lighter, as well.
Captive clutch failure in the Ford 6R140 is a chronic problem that is difficult to address with stock components or traditional methods. 
Unlike most lockup converters, the 6R140 clutch does not engage the front cover — it moves away from the engine block and engages a stamped, steel backing plate, which is relatively thin and prone to flex. SunCoast addresses these issues by using a custom rigid backing plate that reduces deflection, improving apply conformity. This process provides a more durable reaction surface than OE, improving longevity and reliability for years to come.
Another weak point is the OE clutch, which is held together by a set of small, weak leaf springs. These springs are often broken or on the verge of breaking, causing the OE steel clutch plates to break loose and gouge the cover splines. Clutch failure occurs when damage and debris become severe, a particularly frequent issue in heavy-duty trucks that put massive stress on converter components. SunCoast improves the factory spring system on this 6R140 torque converter with a much more robust system, while also utilizing our ZERO-DRAG technology.
Revolutionizing this industry isn't easy. SunCoast has done it yet again with our new captured clutch 6R140 Billet Quadralock Torque Converter. This revolutionary new converter design is changing the way we look at converter lock-up strategies forever. The captured clutch design converter operates much differently than other conventional torque converters. The captured clutch design eliminates the need to exhaust fluid from the backside of the apply piston. This design allows for much quicker apply rates than what conventionally occurs.
With the multitude of SunCoast custom stator options we can build the perfect converter to address whatever needs you may have. Whether you are looking for an improved stock replacement, or full blown sled pulling rig, we have the ability to build it to your specific needs.
Converter Features & Benefits
Furnaced brazed fins
ADCCT Anti Drag Captured Clutch Technology
Utilizes factory lock-up clutch damper 
4140 HTSR billet steel clutch retain ring
CNC machined billet forged one piece cover
Torrington Thrust bearing design
Increased clutch count
Quadralock captured clutch technology
Larger apply piston
Over 1,000 PSI of additional clamping force
Upgraded custom sprag
Billet stator for improved efficiency
Multiple stall speeds available